Remington R300 Manuel d'utilisateur télécharger pdf (Page 15)

106088

482-75

482-74

90˚

482-76

482-45

482-77

WATER

Operation

5. Place the muzzle of tool perpendicular to work surface without tilting the tool. Push

tool against work surface until sliding action of barrel stops.

6. Squeeze trigger to set power fastener. Be sure to keep pressure on tool during this

operation.

8. Should the tool fail to fire, hold the muzzle firmly against the work surface for 30

seconds. Release the trigger and remove pressure on the tool while holding the

muzzle against the work surface. Again press the tool firmly against the work surface

and pull the trigger. If the tool still fails to fire, hold the tool firmly against the work

surface for another 30 seconds before unloading and carefully discarding the

misfired power load into water or oil.

7. After fastening is made, slide barrel forward rapidly. This motion ejects the spent

power load and resets the piston for the next fastening. Make sure spent load has

ejected from tool.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Pas de commentaire

Remington R300 Manuel d'utilisateur Page 15