Remington WPG-150 Manuel d'utilisateur télécharger pdf (Page 5)

9

Oiling the blades:

If you use your trimmer in the shower or

rinse the attachments,you will need to

lubricate the cutter blades once a month

with blade oil.Simply spread 1-2 drops of

oil lightly over the cutters with your finger-

tip.Wipe away any excess oil from the

cutters or the groomer.

Oil cautions

■ Use only the light-grade oil supplied or a

suitable alternative like sewing machine

oil – these oils will not evaporate and

will not slow down the blades.

■ Do not use hair oil,grease,or any oil

mixed with kerosene or solvent,as the

solvent will evaporate and leave the

thick oil,slowing the blades.

Note:Always store this appliance and cord

in a moisture-free area.Do not store it in

temperatures exceeding 140°F (60°C).

Tr o u b l e s h o o t i n g

? If the groomer doesn’t work when

turned on:

It may simply need charging.Remember,

the groomer needs to be charged for 14-16

hours before first use.If charging doesn’t

solve the problem,contact an authorized

Remington Service Center regarding battery

replacement.

? If the groomer does not hold a charge:

Fully discharge it by running the appliance

until it stops.Then follow the recharging

instructions above.If the time between

recharging cycles does not increase, the

battery may need replacing.Contact an

authorized Remington Service Center.

? If the cutters do not move:

The cutting unit may be dirty and clogged.

Clean and lubricate the unit as described on

the preceeding page.

Note: This appliance does not contain

any user-serviceable parts.Bring this

appliance to an authorized service

representative for service.

8

To assure optimal performance,Remington

®

recommends you turn off the groomer after

each use and unplug the adapter when it’s

not being used to recharge the groomer.

Clean your groomer regularly

Cleaning with brush

Your groomer’s cutting blades are perma-

nently lubricated and will never need oiling

if they are never exposed to water. To main-

tain this lubrication,use the enclosed brush

to clean the unit.

Thoroughly brush and blow out hair clip-

pings from the cutter, the bottom of the

attachments,and the top of the

power handle.

Cleaning with water

Your groomer’s trimmer attachments hav e

r u s t - r e s i s t a n t ,stainless-steel cutting blades

t h at permit the cutting assemblies to be

rinsed under running water if you choose.

■ Remove all attachments

by rotating them counter-

clockwise to the unlock

position and pulling the

attachment off.

■ Rinse the attachments

under warm running

water. Do NOT use hot

water, which may cause damage to

components.

! Do not use harsh or corrosive cleaners

on the unit or its attachments.

! Do not apply pressure or hard objects

to attachments.

Cleaning & Maintenance

Cleaning the Mini-shaver

Thoroughly brush and blow out hair

clippings from the cutter, the bottom of

the attachments,and the top of the

power handle or you may rinse.

■ Press the buttons at the ends of the

screen head.

■ Remove the head and shake out

the clippings or rinse.

■ Blow off the cutter assembly or rinse.

■ Replace the head,making sure the unit

snaps in place.

1 2 3 4 5 6 7 8 9 10 ... 18 19

Commentaires sur ces manuels

Pas de commentaire